0.01mm Common Rail Denso Injector Adjusting Shim International
Standards
Name: Injector shims, Common rail injector adjusting shims
Model: B45
Specification: Φ21.5/Φ24.3
Thickness range: 3.90- 4.13mm
Thickness difference. 0.01mm/spec
Total type: 24 types
Total quantity per set: 240pcs
Application: for the adjusting of Denso common rail injectors,
including but not limited in below models:
095000-0145 095000-0562
095000-0761 095000-0801
095000-1211 etc
This B45 is for Denso common rail injectors. You could also order
based on the thickness you need(10pcs/thickness).
We supply common rail adjust shims for Bosch and Denso common rail
injectors:
* For Bosch injectors:
B11, B12, B13, B14, B15, B16, B17, B22, B25, B26, B31, B37, B40,
B41, B42,
* For Denso injectors:
B21, B23, B24, B27, B45
You could choose the specification for each model based on what you
need.
We also select the most popular models and specification as a set
for you, our customers, to try:
A: Whole series Shims sets including the both Bosch and Denso
shims:
* Ordering Code: TQ10 Set including B11/B12/B13/B14/B16/B22/B25/B26/B27/B31
- 10 models applied to both Bosch and Denso common rail injectors
- 10 types of most popular thickness of each model
- 10pcs for each thickness
in total 1,000pcs in the set
* Ordering Code: TD05 Set including B11/B12/B13/B14/B16/B22/B25/B26/B27/B31
- 10 models applied to both Bosch and Denso common rail injectors
- 10 types of most popular thickness of each model
- 5pcs for each thickness
in total 500pcs in the set
B: Shims sets for Bosch common rail injectors:
* Ordering Code: TB07 including B13/B14/B16/B22/B25/B26/B31
- 7 models applied for Bosch common rail injectors
- 10 types of most popular thickness of each model
- 10pcs for each thickness
in total 700pcs in the set
C: Shims sets for Denso common rail injectors:
* Ordering Code: TD04 including B21/B23/B24/B27
- 4 models applied for Denso common rail injectors
- 10 types of most popular thickness of each model
- 10pcs for each thickness
in total 400pcs in the set
FULL SET OF B45 SHIMS WITH 24 TYPES, 10PCS/TYPE, IN TOTAL 240PCS
| 1 | B45 | 3.900 | 10PCS |
B45
SPECIFICATION: Φ22.4/Φ25 DENSO
0.01MM DIFFERENCE/THICKNESS
1.155-1.265 MM(0.010±0.002)
IN TOTAL 24 THICKNESSES
|
| 2 | B45 | 3.910 | 10PCS |
| 3 | B45 | 3.920 | 10PCS |
| 4 | B45 | 3.930 | 10PCS |
| 5 | B45 | 3.940 | 10PCS |
| 6 | B45 | 3.950 | 10PCS |
| 7 | B45 | 3.960 | 10PCS |
| 8 | B45 | 3.970 | 10PCS |
| 9 | B45 | 3.980 | 10PCS |
| 10 | B45 | 3.990 | 10PCS |
| | | | |
| 11 | B45 | 4.000 | 10PCS |
| 12 | B45 | 4.010 | 10PCS |
| 13 | B45 | 4.020 | 10PCS |
| 14 | B45 | 4.030 | 10PCS |
| 15 | B45 | 4.040 | 10PCS |
| 16 | B45 | 4.050 | 10PCS |
| 17 | B45 | 4.060 | 10PCS |
| 18 | B45 | 4.070 | 10PCS |
| 19 | B45 | 4.080 | 10PCS |
| 20 | B45 | 4.090 | 10PCS |
| | | | |
| 21 | B45 | 4.100 | 10PCS |
| 22 | B45 | 4.110 | 10PCS |
| 23 | B45 | 4.120 | 10PCS |
| 24 | B45 | 4.130 | 10PCS |
Precision is the key requirement for adjusting shims.Accurate
adjustment for fuel quantity si completed depending on grouping of
products.We adopt high precision optical ruler to control lapping
dimension, and can control product precision dimension within
0.002mm.We finish grouping by inspecting one product with two
products inside dustfree workshop.One product is measured for no
less than 5 times from finishing process to finished product
(Testing methods:use high precision digital display micrometer to
measure conformity between actual dimension and required
dimension,and whether the dimension for same grouped products is
same or not.)
Geometric tolerance of adjusting shims is directly related to the
maintenance quality of fuel injectors.Main geometri tolerance
requirement for adjusting shims is depth of parallelism.Large shim
will affect product tightness while small shim will affect
reliability and stability of products.We adopt high-precision
double-sided lapping machine to ensure and control depth of
parallelism for products within 0.002mm.Adoption of one-time
forming process better ensures product axiality(Testing methods:use
parallelism tester and deflection instrument to test parallelism
depth and axiality respectively)
Material quality and hardness of adjusting shims affect durability
and stability of products.We choose high quality material and
advanced thermal treatment equipments/technology.
